How to Recharge a Breeze Pro: A Comprehensive Guide

Are you looking for a comprehensive guide on how to recharge a breeze pro? Look no further! At, we have put together an easy-to-follow tutorial to help you effectively recharge your Breeze Pro device. Whether you’re a beginner or an experienced user, our step-by-step instructions will ensure a safe and successful charging process. From safety precautions to troubleshooting tips, we’ve got you covered. So, let’s dive in and learn how to recharge a Breeze Pro!

How to Recharge a Breeze Pro: A Comprehensive Guide
How to Recharge a Breeze Pro: A Comprehensive Guide
Key Takeaways
Follow safety precautions when recharging a Breeze Pro.
You can recharge a Breeze Pro by connecting charging wires to the battery.
Disassemble the Breeze Pro carefully to access the battery.
Ensure proper connection of the charging wires to the battery nodes.
Troubleshoot any issues that may arise during the charging process.

Safety Precautions for Recharging a Breeze Pro

Why Safety Precautions are Important

When it comes to recharging a Breeze Pro, it is crucial to prioritize safety to avoid any potential risks or accidents. By following these safety precautions, you can ensure a safe and smooth charging process.

1. Use Protective Gear

Before you begin, make sure to wear protective gloves to shield your hands from any potential hazards. Vape juice can be sticky, and wearing gloves will help prevent any unwanted contact with the liquid.

2. Work in a Well-Ventilated Area

It is essential to recharge the Breeze Pro in a well-ventilated space. This will help dissipate any fumes or vapors that may be emitted during the charging process, reducing the risk of inhalation.

3. Avoid Puncturing or Damaging the Battery

Take extra care to avoid puncturing or damaging the battery while disassembling the Breeze Pro. Using pliers instead of sharp tools like knives or screwdrivers can minimize the risk of accidentally piercing the battery.

Safety Precautions for Recharging a Breeze Pro
Safety Precautions for Recharging a Breeze Pro

Step-by-Step Guide to Disassembling the Breeze Pro

Safety Precautions

Before you begin disassembling your Breeze Pro, it’s important to take some safety precautions:

  • Ensure the device is turned off and disconnected from any power source.
  • Wear protective gloves to avoid any potential injuries.
  • Work in a well-ventilated area to minimize exposure to fumes.

Disassembling the Breeze Pro

Follow these steps to safely disassemble your Breeze Pro:

Step 1: Remove the Bottom Cap

Using pliers, carefully pry off the bottom cap of the Breeze Pro. Avoid using sharp tools that may damage the device or cause injury.

Step 2: Slide Out the Battery

Gently tap the Breeze Pro on a table or surface to slide the battery out or make it flush with the housing. Do not pull on the wires.

Step-by-Step Guide to Disassembling the Breeze Pro
Step-by-Step Guide to Disassembling the Breeze Pro

Step 3: Remove the Silicone Housing

Take off the silicone housing for the air sensor and light by making a small, careful cut in the silicone and removing the sensor from the glue. Remember to handle it with care as it will fit back together easily.

Step 4: Access the Battery

With the silicone housing removed, you can now access the battery. Take caution not to damage any components while proceeding.

Step 5: Proceed with Recharging

Now that you have successfully disassembled your Breeze Pro, you can proceed with the steps to recharge it. Refer to the previous section for instructions on connecting the charging wires to the battery.

Connecting the Charging Wires to the Battery

Step-by-Step Guide

Once you have safely disassembled the Breeze Pro and accessed the battery, it’s time to connect the charging wires. Follow these steps:

  1. Carefully cut away a small amount of the orange electrical tape from the red port on the end of the battery.
  2. If you don’t have a “crackhead cable,” you can use an old broken apple or android cable. For an android/USB-C cable, simply use the red and black wires. For an apple cable, ignore the stringy/fiberglass stuff and use the red and metallic cables.
  3. Connect the black or metallic wire to the black solder node on the sensor.
  4. Connect the red wire to the red node on the battery.

Troubleshooting Tips

If you encounter any issues during this process, here are some troubleshooting tips:

Issue Troubleshooting Tip
Charging not working Check if the black or metallic wire becomes warm when connected. If not, there may be an issue with the connection.
Overheating If the wire becomes too hot to touch, stop charging and let it cool down before proceeding.
Battery swelling or releasing fumes If this happens, it’s essential to stop charging immediately and dispose of the Breeze Pro properly.


Troubleshooting Tips for Successful Charging

Common Issues and Solutions

If you encounter any difficulties while charging your Breeze Pro, don’t worry! Here are some common issues and their corresponding solutions:

  • Issue 1: The charging wires are not becoming warm.
    • Solution: Check the connection between the wires and the battery nodes. Ensure they are securely attached.
  • Issue 2: The charging wires become too hot to touch.
    • Solution: Immediately stop charging and allow the wires to cool down. If the problem persists, consider using a different set of wires.

Tips for Safe Charging

When recharging your Breeze Pro, it’s important to prioritize safety. Here are some tips to ensure a safe charging experience:

  1. Charge in a well-ventilated area: This helps prevent the accumulation of flammable vapors.
  2. Avoid overcharging: Once the battery is fully charged, disconnect the charging wires to avoid potential hazards.
  3. Monitor for signs of damage: Regularly inspect the battery and charging wires for any signs of swelling, fumes, or damage. If detected, discontinue use immediately.

Emergency Situations

In rare cases, emergency situations may occur during the charging process. Here’s what you should do in such scenarios:

Emergency Situation Recommended Action
Battery catches fire Submerge it in water and place it outdoors, away from people, pets, or flammable items.
Battery releases fumes Dispose of the Breeze Pro immediately

Alternative Methods to Unclog a Disposable Vape

Using a Small Tool

If you’re dealing with a clogged disposable vape, one simple method to try is using a small tool like a paper clip. Here’s how:

  1. Remove the cap of your disposable vape.
  2. Gently insert a small tool, such as a paper clip, through the center hole of the mouthpiece.
  3. Cautiously push the tool into the vape until you reach the bottom, about one inch deep.
  4. Rotate the tool and pull it up to dislodge any clogs or oil in the cartridge.
  5. Repeat these steps two to three times to clear the clog.

Applying Heat

If the previous method didn’t work for you, applying heat to the vape can help break up any crystallization or clogs. Here are a couple of methods you can try:

Method 1: Warm Environment

Place the vape in a warm part of your home, such as next to a radiator, for about 5 minutes. The heat will help loosen any clogs or crystallization in the cartridge.

Method 2: Blow Dryer

If you have a blow dryer, you can use it to apply heat to the disposable vape. Start by waving the blow dryer back and forth across the pen from about a foot away. Increase the heat gradually as needed. Alternatively, you can place the disposable vape in a cup and direct the blow dryer’s heat into the cup for faster results.

Water Submersion Method

If you don’t have a blow dryer, another alternative is to use the water submersion method. Here’s how:

The information in this article has been compiled from various sources, including and newspapers. Although we have made efforts to verify its accuracy, we cannot guarantee that every detail is completely accurate and verified. Therefore, we advise caution when citing or using this article as a reference for research or reports.
Back to top button